Products List

FRP/GRP composites are fiber-reinforced polymer. The strength of GRP composite depends on the type, direction, quantity and location of fiberglass used in product. Resin used for bonding glass fibers which makes it more difficult piece, impact resistance and corrosion resistance.

Liquid resin and continuous fiberglass roving are systematically laid in the mold, layer after layer manually, to produce the desired thickness and panel dimensions. The finished molds are set aside for a predetermined time to allow the panel to cure. The panel is then ejected from the mold. The molds are cleaned and prepared for the process to begin again.

The pultruded grating provides increased load capacity with moderate levels of corrosion resistance. The components (bearing bars and cross bars) are pulled by machine to have a higher reinforcement content. Its superior load capacity is a result of the higher reinforcement to resin ratio

Composite cable trays are fabricated from components derived from a process called PULTRUSION. This process enables a high percentage of reinforcement to be incorporated into the components giving it very superior strength. The strength of it in relation to its weight therefore exceeds the performance of those of steel or aluminum

FRP/GRP Composite handrail and fences are the other products of this knowledge-based company that are composed of studs sections, squares, metallic pipes and fittings and will be assembled according to customer’s plan. Handrails or fences are shields for people passing that will be installed on the bridges, platforms, around the stairs, pools, ponds, tanks and etc.

FRP/GRP Composite Ladder is the other product of this knowledge-based company that is composed of square and pipe sections and will be assembled according to customer’s inquiry.

One of the best composite materials has been known in different fields for production lightweight, high strength and durable Concrete sections is FRP/GRP composite rebar

In Pultrusion because of the process, all shapes that are the same in length, can be produced. Asia Composite company, due to its experience in this field, has prepared all the common cross-sectional molds for the production of GRP product and also new molds are added over time.